V.35 Interface Converter/Inverse Mux

Global Tech V.35 Interface Converter can provide conversion between the standard V.35 interface and G.703 E1 port, or 10/100 Base-TX Ethernet port at physical layer, and provide stable and seamless connection between different network interfaces.

The V.35 Interface Converter is deployed when the V.35 connection is mandatory but only E1 channel or Ethernet channel is available, and support DCE mode to cooperate with DTE or DCE equipment.

Product Feature

●Varied system timing modes, E1/Ethernet Main Clock, E1/Ethernet Line Clock, V.35 Main Clock and V.35 External Clock.

●Support 3 Loopback configurations, E1/Ethernet Local Loopback, V.35 Local Loopback and configurable V.35 Remote Loopback.

●Hardware configurable combination from 31 timeslots. E1 interface can support N*64K bit rate, ranged from 64K up to 2048K.

●Plug and play at V.35 interface, compatible with DTE or DCE equipment.

 Technical Parameter

●   Ethernet Interface

■ 10M/ 100M auto negotiation

■ MDI/ MDIX auto negotiation

■ Related Standard: IEEE 802.3, 802.1Q (VLAN)

■ MAC Address Table: Up to 4096

■ Ethernet Buffer: 64M SDRAM

●   E1 Interface

■ Bit Rate: 2.048M bps ±50ppm

■ Related Standard: ITU-T G.703, G.704

■ Impedance: 75Ω (BNC), 120Ω (RJ45)

■ Timing: Internal Clock, Line Clock.

●   V.35 Interface

■ Bit Rate: N* 64Kbps, N=1~ 32

■ Connector: DB25 Female

■ Connection Mode: DCE

■  Timing: Internal Clock, V.35 External Clock

●   Operation Environment

■ Working Temperature: -10℃~ 60℃

■ Storage Temperature: -40℃~ 70℃

■ Relative Humidity: 5%~ 95 %, non-condensing

■ No corrosive and solvent gas, no dust and heavy EMI

■ Power Supply:AC 180V~260V

DC -72V~-36V

■ Typical Consumption: ≤15W

■ Physical Dimension:

V.35/E1: 230mm(W)* 33mm(H)* 155mm(D)

V.35/Ethernet:

215mm(W)* 40mm(H)* 150mm(D)

Typical Network Diagram

For more technical detail, please visit our website---http://www.cantongt.net